【Adjustable & Controllable Temperature】With a thermostat, the temperature of the seedling heating mat can be controllable and adjustable from 5℃ to 42℃(41℉-108℉) which can provide warm and protect the seed or growth at the same time.
【IP67 Waterproof Rating】 Its surface adopts premium PVC material, which ensures better use safety and longer service life. And it features IP67 high-level water resistance, which is dustproof, splashproof, and easy to clean. Due to its high flexibility, we can roll it up for storage.
【INTEGRATED TEMPERATURE CONTROL】Our seedling heat mat comes with a thermostat controller and thermostat probes to give accurate readings in both cold and warm environments. Simply place the temperature probe in the temperature monitoring area and set up the desired temperature. The digital display supports Fahrenheit and Celsius units.
【PRINCIPLE】The Seeding heat mat is used to increase the success rate of germination, root cutting. Maintains a consistent heat effectively raise rooting area temperatures approximately 10-20°F above ambient air temperature. Bottom heat excites seeds into thinking it's spring.Can be used greenhouse, nurseries and indoor gardens.
【ADVANTAGES】: Nice low grade heat keeps everything at the right temperature, more efficient than trying to heat an entire greenhouse or shed, faster plant growth and seed germination. And you can get a bigger variety of plants from seeds, cheaper than buying all the seedlings from the nursery. Instructions is printed on the surface for your convenience.
WARNING: DO NOT IMMERSE CONTROLLER IN WATER
If the probe’s temperature reaches 108 degrees F, the automatic safety shut-off is activated.
1.Do not cover the heat mat with any other material
2.Never allow the plant heat mat to become submerged in water or any other liquid.
3.Don't place the heated mat for plants on or under any other heating, warming or insulating device.
SET UP THE THERMOSTAT
1. Insert the probe approximately 1"-1½"into the rooting area.
2. Position the thermostat up and away from seedling trays and stray water.DO NOT SUBMERGE THE CONTROLLER IN ANY LIQUID.
3. Plug the heat mat in outlet. The power LED lights up.
4. Set the maximum desired temperature for the heat mat.
Controller Set Process
1. Press the SET button to display the current pre-set temperature.The thermostat's LED screen shows the current temperature whenever the SET button is not activated.
2. Press and hold the SET button until the LED starts to blink,then you are able to adjust the temperature up or down by pushing the (UP) or (DOWN) arrows. The thermostat's LED screen shows the numbers as you cycle through them. Press the SET button again to set the chosen temperature. The HEATING light cycles on when the mat is in the process of heating. When the LED is not lit, the mat is not providing heat. The light turns off automatically when the mat reaches the pre-set temperature.
3. Press and hold the (DOWN)arrow button for three seconds to display the temperature in Celsius. Press and hold the (UP)arrow button to display the temperature in Fahrenheit.
